وضع حد أقصى لإجراءات مساحيق الستيرويد

وضع حد أقصى لإجراءات مساحيق الستيرويد:

الاحتياجات:

• آلة وضع حد للسقف (اي: كاب-M-سريعة, آلة كبسولة)
• قبعات فارغة: حجم 0 أو 00
• مجموعة من المقاييس: must be accurate with very small measures
• powder of selected compound (اي: anavar, كلوميد, ديانابول – ميثاندروستينولون – , الخ.)
• مسحوق حشو (اي: بيكربونات الصوديوم, نشا الذرة, الخ.)
• mortar and pestle for mixing purposes

Procedure for an accurate mix:
To make this easier to follow, I will refer to the selected compound powder as ‘CP’ and the filler powder as ‘FP’.

• place blank caps in the capping machine
• fill the caps with the FP (make sure they are completely full)
• empty the caps out onto the scales and weight the FP
• divide the weight of the total FP by the number of capsules the machine produces per time
• clean the scales off before proceeding
• place blank caps in the capping machine
• fill the caps with the CP (make sure they are completely full)
• empty the caps onto the scales and weigh the CP
• divide the weight of the total CP by the number of capsules the machine produces per time

You will now need to determine the ratio of weights of the respective powders CP:FP which you have just capped and weighed.
Remember now that you have 24 caps of CP and 24 caps of FP for a total of 48 caps.

This is just an example of weights:

We determined that our total FP weight for the 24 caps was 18,000 mg or 750 mg per cap.
We determined that our total CP weight for the 24 caps was 10,800 mg or 450 mg per cap.

If you are making 100 mg caps of a specific compound for use, then your equations would look like this:
ملاحظه: 100 mg does not represent the weight of the cap but rather the active indredient of the finished cap.

100 ملغ CP = (عدد غير معروف) ملغ FP

450 ملغ CP = 750 ملغ FP
100 ملغ CP = 750 ملغ FP / 4.5 ملغ CP
100 ملغ CP = 166.67 ملغ FP

750 ملغ FP – 166.67 ملغ FP = 583.33 ملغ FP

583.33 mg يمثل بالضبط كم FP يجب أن تستخدم لكل غطاء للسماح لوجود CP.

ولذلك, لجعل 48 – 100 قبعات ملغ من المركب المحدد في هذا المثال, سوف تحتاج:

• 27,999.84 ملغ من FP
• 4,800 ملغ CP

لخلط CP وFP معا سوف تحتاج إلى استخدام هاون وpestle.
لمزيج مناسب, make sure that the amount of FP you are adding to the mortar is equal to the existing CP or CP+FP as the mix progresses.

• place all of the CP in the mortar (4,800 mg from the above example)
• place an equal amount of the FP in the mortar (4,800 مغ)
• mix for a few minutes
• place an equal amount of FP in the mortar (this time 9,600 mg which is equal to 4,800 ملغ CP + 4,800 ملغ FP)
• mix for a few minutes
• place the remaining FP into the mortar and mix

You are now ready to cap.
Follow the directions of the particular capping machine which you are using.

مصنع OEM التخصيص خدمة :

فريق هونغشي فارم
جميع الحقوق محفوظة