» News & Support » Recipe & Profile » Recipe of Steroid(Winstrol 50 mg/ml Oil Base Injectable)
  • Recipe of Steroid(Winstrol 50 mg/ml Oil Base Injectable)

    Lab Support and Brand Optimization:
    1. Professional lab technical guidance (For finished gears producers or lab owners)
    2. Equipment and Machines Support (Filtering machine, Caps, bottles and crimper)
    3. Label designing and printing Assistance (Customize box and label)
    If you are going to start your own business, come to us !

    • Description
    • Oil List
    • Advantages
    • Service

    Winstrol

    Note: there is a tendency to ruin the product during conversion so only use one gram at a time

    Powder: 1 gram
    Produces: 20 ml at 50 mg/ml

    Requirements:

    • 1 gram of winstrol
    • one 20 ml glass vial or larger
    • one 20 ml sterile glass vial or larger
    • one 0.45 Whatman sterile syringe filter
    • two 5 or 10 ml syringes
    • two 3 ml syringes
    • three 18 or 20 gauge pins
    • two 22 gauge pins
    • 17 ml of sesame seed oil
    • 2 ml of benzyl alcohol
    • 2 ml of Mr.T super solvent

    Procedure:

    • measure one gram of powder
    • draw out 2 ml of the Mr. T super solvent using one of the 3 ml syringes
    • place the measured powder in the open vial and add the solvent
    • place the rubber stopper back on the vial and put one of the 20 gauge pins in the stopper
    • place the vial in a small pan and place the pan on the eye of the stove
    • heat until the powder dissolves into a liquid (usually around 239.8-242 degrees F)
    • turn off the heat and let it cool down in the pan to room temperature (approx. 15 minutes)
    • heat the oil in a suitable container in the oven until it reaches a minimum of 212 degrees F to sterilise it (it will be necessary to use slightly more oil than is required as all of it will not be able to be utilised)
    • draw out 0.2 ml of benzyl alcohol (this will account for 1% of the solution so make sure the measurement is correct)
    • add the benzyl alcohol to the solution in the vial and shake very gently
    • draw out the oil with the 10 ml syringe (make sure the oil has cooled down somewhat before doing this)
    • add 15 ml of the oil (saving 2 ml for later) to the solution in the vial and shake very gently Note: If the winstrol begins to clump back up, reheat the solution (place in a pan, put the pan on the eye of the stove and heat until it liquefies again) and allow it to cool down slowly
    • place one of the 18 gauge pins in the sterile, unopened vial and attach the Whatman sterile filter
    • draw out the solution using the other 10 ml syringe, attach to the filter, and slowly press the solution out into the sterile vial
    • use the previously saved 2 ml of oil in the other syringe and run it through the filter to ensure that all the Winstrol passes through
    • after the filtering process, leave the pin in the sterile vial and remove the filter
    • place the vial in a pan and place the pan on the eye of the stove
    • heat for 15-20 minutes, remove from heat, and let it cool down to room temperature (approx. 15 minutes)

    The finished solution will be light-gold in colour.
    Ensure that you follow the guidelines carefully for this conversion.

    For conversions larger than one gram, refer to the powder conversion calculator at the top of this page.

    Steroid Liquid Conversion Procedures(Lab Supply):

    Step 1 Put Testosterone powder into the beaker
    Step 2 Put BA into the beaker
    Step 3 Put BB into the beaker
    Step 4 Put the beaker on the heater(80 ºC). Use the glass rod to stir until it dissolves completely.
    Step 5 Get the beaker down from the heater, wait until the transparent yellow liquid is cool
    Step 6 Put the grape seed Oil into the beaker, Use the glass rod to stir the liquid.
    Step 7 Filter the liquid with a sterile filter or a filtering machine

    Optimize Your Lab with Quality Steroid:

    Professional Laboratory with Advanced Equipments & Developed Technology

    Pre-finished Steroid Oil, Customized Concentration Available!

    1. We only use USP/BP standard steroid powders, oil and solvents to make steroid injections.

    2. We offer semi-finished steroid injections. We have OEM service for blend steroid.

    3. The semi-finishe oil is pre filtered one time in our lab.

    For liquid, you can choose to filter again and fill into vials then it is finished liquid

    For powder, we can supply best quality on market, All ingredients complies with USP/BP/EP standard.

    Filtering smoother, Vial, stopper, cap, filter, filter membrane, crimper and labels can be provided here.

    If you wanna creat a brand belongs to yourself, come work with us!

    HOT: Test E 300, Anavar 50, Sus 250, Deca 250, Dbol 50, Winstrol 50, Tren E 200, BU 300, Mast P 100, Primo 100, NPP 200, Tren Hex 50, Tritren 180, Anomass 400, Test Blend 450, Supertest 450

    Hongxi Pharm Team
    All Rights Reserved

    Injectable Anabolic Steroids:
    Testosterone Oil Test Base 100mg/ml @100ml
    Testosterone Cypionate 250mg/ml @100ml
    Testosterone Enathate 250mg/ml @100ml
    Testosterone Enathate 600mg/ml @100ml
    Testosterone Propionate 100mg/ml @100ml
    Testosterone Propionate 200mg/ml @100ml
    Testosterone Undecanoate 500mg/ml @100ml
    Testosterone Sustanon 200mg/ml @100ml
    Testosterone Sustanon 250mg/ml @100ml
    Testosterone Sustanon 300mg/ml @100ml
    Testosterone Sustanon 350mg/ml @100ml
    Testosterone Sustanon 400mg/ml @100ml
    Testosterone Sustanon 600mg/ml @100ml
    Turinabol 50mg/ml @ 200ml
     
    Boldenone Oil Boldenone Undecylenate 300mg/ml @100ml
    Boldenone Cypionate 200mg/ml @100ml
     
    Nandrolone Oil Nandrolone Decanoate 200mg/ml @100ml
    Nandrolone Decanoate 250mg/ml @100ml
    Nandrolone cypionate 200mg/ml @100 ml
    Nandrolone phenylpropionate 200mg/ml @100ml
     
    Drostanolone Oil Drostanolone Propionate 100mg/ml @100ml
    Drostanolone Enanthate 200mg/ml @100ml
     
    Trenbolone Oil Tren base 100mg/ml @100ml
    Tren Acetate 80mg/ml @100ml
    Tren Acetate 100mg/ml @100ml
    Tren Acetate 200mg/ml @100ml
    Tren Enanthate 60mg/ml @100ml
    Tren Enanthate 100mg/ml @100ml
    Tren Enanthate 150mg/ml @100ml
    Tren Enanthate 200mg/ml @100ml
    Parabolone (Trenb Hexahydrobenzyl Carbonate) 50mg/ml @100ml
    Parabolone (Trenb Hexahydrobenzyl Carbonate) 75mg/ml @100ml
     
    Methenolone Oil Primobolan Depot (Methenolon Enanthate) 100mg/ml@ 100ml
     
    Oral Liquid Stanozolol (Winstrol) 25mg/ml @100ml
    Oxymetholon (Anadrol) 50mg/ml @100ml
    Oxandrolon (Anavar) 20mg/ml @100ml
    Clomid(Clomiphen Citrate) 50mg/ml @100ml
    Nolvadex(Tamoxif Citrate) 20mg/ml @100ml
    Arimidex (Anastrozol) 5mg/ml @500ml
    Femara(Letrozol) 5mg/ml @500ml

    Blend Steroid and Component:

    Steroids Oil Include mg/ml
    TMT 300 Testosterone Propionate 100 mg/ml
    Dromostanolone Propionate 100 mg/ml
    Trenbolone Acetate 100 mg/ml
    Anomass 400 Testosterone Enanthate 150 mg/ml
    Boldenone Undecylenate 150 mg/ml
    Trenbolone Enanthate 100 mg/ml
    Ripex 225 Testosterone Propionate 75 mg/ml
    Dromostanolone Propionate 75 mg/ml
    Trenbolone Acetate 75 mg/ml
    Test Blend 450 Testosterone Propionate 30 mg/ml
    Testosterone Phenylpropionate 60 mg/ml
    Testosterone Isocaproate 60 mg/ml
    Testosterone Decanoate 100 mg/ml
    Testosterone Enanthate 100 mg/ml
    Testosterone Cypionate 100 mg/ml
    Supertest 450 Testosterone Acetate 32 mg/ml
    Testosterone Decanoate 147 mg/ml
    Testosterone Propionate 73 mg/ml
    Testosterone Phenylpropionate 73 mg/ml
    Testosterone Cypionate 125 mg/ml
    TMT 375 Trenbolone Enanthate 125 mg/ml
    Drostanolone Enanthate 125 mg/ml
    Testosterone Enanthate 125 mg/ml
    Tri Test 400 Testosterone Enanthate 120 mg/ml
    Testosterone Cypionate 120 mg/ml
    Testosterone Decanoate 160 mg/ml
    Test 400 Testosterone Cypionate 175 mg/ml
    Testosterone Enanthate 175 mg/ml
    Testosterone Propionate 50 mg/ml
    Tri Tren 180 Trenbolone Enanthate 60 mg/ml
    Trenbolone Acetate 60 mg/ml
    Trenbolone Hexahydrobenzyl Carbonate 60 mg/ml
    TM Blend 500 Trenbolone Enanthate 250 mg/ml
    Testosterone Enanthate 250 mg/ml

     

    Oral Steroid Liquid:
    Dianabol(Metandienone) 50mg/ml 80mg/ml
    Winstrol(Stanozolol) 25mg/ml 100mg/ml
    Anadrol(Oxymetholone) 50mg/ml
    Anavar(Oxandrolone) 20mg/ml 50mg/ml
    Clomid(Clomiphene Citrate) 50mg/ml
    Nolvadex(Tamoxifen Citrate) 20mg/ml
    Armidex(Anastrozole) 5mg/ml
    Femara(Letrozole) 5mg/ml
    Oral Turinabol 50mg/ml
    Proviron(Mesterolone) 50mg/ml

     

    Five Advantages of Making Finished Steroids:

    1. The cost is only 40-60% of the normal cost

    2. They take only a short time to prepare

    3. They are easier and cheaper to ship than amps or vials

    4. Less chance of your order getting seized by customs

    5. Unlike vials and amps, they come with a refund/reship policy

    We can not only supply raw steroids powder, but also semi-finished liquid steroids.

    We can help you make your brand, come on and join us

    F.A.Q about Premade Steroid Oil:

    Q1. What is Premade or Semi-finished Steroid Oil?

    A1. The premade or semi-finished oil that we are offering are actually finished. The oils are brewed with solvents and carrier oil already. But due to the packaging issues, the oils are unsterile during the shipping or posting. The only process left for you is to make them sterile and safe for using - sterile filtration, quite simple process.

    Q2. Why not the finished steroid oils in vials?

    A2. To ensure safe delivery to your country, we use the discreet package, which can not make sure the sterilize environment. According to the success rate of parcels we sent to many countries, premade or semi-finished steroid oil will be a better choice. What’s more, this is a great chance for you to make your business also.

    Q3. Why choose the Premade or Semi-finished Steroid Oil?

    - If you want to find the legit steroid gear for self use, the premade steroid oils effects same strength as the finished ones and help you save money.

    - If you want to expand your own business, rebuild your own rand, the premade oils we serve help you save time and earn more.

    - If you have special requirement about the carrier and the concentration, our lab can also do as your mind.

    Q4. How to Filter the Premade or Semi-finished Steroid Oil?

    A4. We will give you instructions about how to filter step by step. And we also serve the syringe filters, vacuum filters, empty vials(with caps and tops), vial crimper for you to make the finished steroids.

     

    , , , , , , , , , , , , , , , , , , , , , , ,

    Enquiry Form ( we will get back you as soon as possible )

    Name:
    *
    Email:
    *
    Message:

    Verification:
    5 + 4 = ?

    Maybe you like also